by means of necessity I was forced to fill a 1/64"-1/32" wide by 1 1/2" long void in some med dark EIRW binding, Don’t ask why
Anyway the most convenient way seemed to be packed dust. but due to the location it was nearly impossible to pack in a white glue and dust paste to fully fill the void with out causing some major clean up issues. so I played around with several end grain dusts to find a good match using CA to flood the dust. After several test with finish applied it turns out that Black Acacia end grain dust worked like a charm, after finish is applied it is a perfect match even after some shaping sanding 
sorry for no pic. It seems Diane is not sure what she has done with the camera. Oh well I wanted to upgrade to a 5MP anyway